Comments on: My Experience with the Motorola CPEo 400 Wimax CPE http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/ A Mushroom A Day Keeps The Koopas Away Sat, 19 Jun 2010 10:37:18 -0500 http://wordpress.org/?v=2.9.2 hourly 1 By: Mohammad Al-Shami http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-271 Mohammad Al-Shami Tue, 09 Feb 2010 06:03:47 +0000 http://blog.al-shami.net/?p=195#comment-271 I have that exact version. Haven't seen any updates after that so I guess it's the latest version. It's buggy IMHO. What you need to do is disable UPnP and just use DMZ or port forwarding. If I'm not mistaken, you shouldn't be able to access the forwarded ports using the public IP address. Try accessing them from another network. I once tested it with my Xbox; The Xbox needs 6 ports to be forwarded. Using DMZ worked as well as forwarding those ports individually. But you need to reboot the CPE before that takes effect. I have that exact version. Haven’t seen any updates after that so I guess it’s the latest version.

It’s buggy IMHO. What you need to do is disable UPnP and just use DMZ or port forwarding.

If I’m not mistaken, you shouldn’t be able to access the forwarded ports using the public IP address. Try accessing them from another network. I once tested it with my Xbox; The Xbox needs 6 ports to be forwarded. Using DMZ worked as well as forwarding those ports individually. But you need to reboot the CPE before that takes effect.

]]> By: Qaisar Nadeem http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-270 Qaisar Nadeem Mon, 08 Feb 2010 19:18:20 +0000 http://blog.al-shami.net/?p=195#comment-270 <blockquote cite="#commentbody-269"> <strong><a href="#comment-269" rel="nofollow">Qaisar Nadeem </a> :</strong><a href="#comment-268" rel="nofollow">@Mohammad Al-Shami </A>HiThanks for your reply. I erased the IP address from DMZ but the port forwarding stopped working at all even from the same machine. I re- eneterd the IP address it started to work from the same machine. But I not working from other network.the software version of my device is : Device Software Version: 02.02.09 (04/29/2009)is there any update available if from where I can get thisregards</blockquote> Part Number: 0114695D01 Model ID: CPEo35400 Hardware Version: D02R05 Serial Number: TQ098S01C8 WiMAX MAC Address: 00:1C:11:27:C4:BE LAN MAC Address: 00:1E:5A:AB:79:EC Service Provider ID: Atheeb Device Bootstrap Version: 10 Data Provisioning Version: 10

Qaisar Nadeem :@Mohammad Al-Shami HiThanks for your reply. I erased the IP address from DMZ but the port forwarding stopped working at all even from the same machine. I re- eneterd the IP address it started to work from the same machine. But I not working from other network.the software version of my device is : Device Software Version: 02.02.09 (04/29/2009)is there any update available if from where I can get thisregards

Part Number: 0114695D01
Model ID: CPEo35400
Hardware Version: D02R05
Serial Number: TQ098S01C8
WiMAX MAC Address: 00:1C:11:27:C4:BE
LAN MAC Address: 00:1E:5A:AB:79:EC
Service Provider ID: Atheeb
Device Bootstrap Version: 10
Data Provisioning Version: 10

]]> By: Qaisar Nadeem http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-269 Qaisar Nadeem Mon, 08 Feb 2010 19:05:25 +0000 http://blog.al-shami.net/?p=195#comment-269 <a href="#comment-268" rel="nofollow">@Mohammad Al-Shami </a> Hi Thanks for your reply. I erased the IP address from DMZ but the port forwarding stopped working at all even from the same machine. I re- eneterd the IP address it started to work from the same machine. But I not working from other network. the software version of my device is : Device Software Version: 02.02.09 (04/29/2009) is there any update available if from where I can get this regards @Mohammad Al-Shami
Hi
Thanks for your reply. I erased the IP address from DMZ but the port forwarding stopped working at all even from the same machine. I re- eneterd the IP address it started to work from the same machine. But I not working from other network.
the software version of my device is : Device Software Version: 02.02.09 (04/29/2009)
is there any update available if from where I can get this
regards

]]> By: Mohammad Al-Shami http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-268 Mohammad Al-Shami Mon, 08 Feb 2010 15:10:42 +0000 http://blog.al-shami.net/?p=195#comment-268 You don't need to place your IP on both the DMZ and port forwarding. What I've seen is that you need to restart the CPE after changing port forwarding settings. My CPE fried last week, I should check with maintenance tomorrow inshalla. Can you tell me which software version you have on yours? You don’t need to place your IP on both the DMZ and port forwarding. What I’ve seen is that you need to restart the CPE after changing port forwarding settings.

My CPE fried last week, I should check with maintenance tomorrow inshalla. Can you tell me which software version you have on yours?

]]> By: Qaisar Nadeem http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-266 Qaisar Nadeem Mon, 08 Feb 2010 06:32:53 +0000 http://blog.al-shami.net/?p=195#comment-266 Hi Shami I am using Motorolla CPEo400 out door device at my Home. It works fine the only Issue that I am facing is that the port forwarding does not work properly. what I have done, I enebale the UPnP and enetered the Local IP Address of my computer in the DMZ and then on the Forwarding Page I enetered the same IP Address and LAN & WAN ports are set to 80. It works only if access my machine from the same Machine, I mean if I use the Public IP and try to access a website that is hosted on my Home PC it works fine. but when I try to access that Public IP from My office it does not work. can you please let me know where is the problem and how can I resolve it. I am in Riyadh Saudi Arabia and the service is provided by www.go.com.sa . regards Hi Shami
I am using Motorolla CPEo400 out door device at my Home. It works fine the only Issue that I am facing is that the port forwarding does not work properly.
what I have done, I enebale the UPnP and enetered the Local IP Address of my computer in the DMZ and then on the Forwarding Page I enetered the same IP Address and LAN & WAN ports are set to 80. It works only if access my machine from the same Machine, I mean if I use the Public IP and try to access a website that is hosted on my Home PC it works fine. but when I try to access that Public IP from My office it does not work. can you please let me know where is the problem and how can I resolve it. I am in Riyadh Saudi Arabia and the service is provided by http://www.go.com.sa .

regards

]]> By: Hesham http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-258 Hesham Mon, 11 Jan 2010 15:33:16 +0000 http://blog.al-shami.net/?p=195#comment-258 Done. It worked fine with me now, as you mentioned I am now connected directly to the Motorola CPE, with filling other information as well Setup -> Basic Setup -> Network Setup -> Router IP Local IP Address : IP in the Motorola IP pool Subnet Mask : 255.255.255.0 Gateway : My motorola IP Local DNS : My motorola IP Setup -> Basic Setup -> Network Setup -> WAN Port Assign WAN Port to Switch : Checked Setup -> Basic Setup -> Network Setup ->Network Address Server Settings (DHCP) DHCP Type: Disabled This will be useful for others as well Thaks alot Mohammad Done. It worked fine with me now, as you mentioned

I am now connected directly to the Motorola CPE, with filling other information as well

Setup -> Basic Setup -> Network Setup -> Router IP
Local IP Address : IP in the Motorola IP pool
Subnet Mask : 255.255.255.0
Gateway : My motorola IP
Local DNS : My motorola IP

Setup -> Basic Setup -> Network Setup -> WAN Port
Assign WAN Port to Switch : Checked

Setup -> Basic Setup -> Network Setup ->Network Address Server Settings (DHCP)
DHCP Type: Disabled

This will be useful for others as well

Thaks alot Mohammad

]]> By: Mohammad Al-Shami http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-257 Mohammad Al-Shami Mon, 11 Jan 2010 14:53:35 +0000 http://blog.al-shami.net/?p=195#comment-257 Yeah utorrent is a bittorrent client, so that might be your issue :) Go to "Setup" then "Basic Setup", set "WAN Connection Type" to "Disabled" and check the box next to "Assign WAN Port to Switch". This will make dd-wrt act as a switch/access point. Of course you need to disable DHCP. You can find that in the "Services" tab. Good luck Yeah utorrent is a bittorrent client, so that might be your issue :)

Go to “Setup” then “Basic Setup”, set “WAN Connection Type” to “Disabled” and check the box next to “Assign WAN Port to Switch”. This will make dd-wrt act as a switch/access point. Of course you need to disable DHCP. You can find that in the “Services” tab.

Good luck

]]> By: Hesham http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-256 Hesham Mon, 11 Jan 2010 14:19:22 +0000 http://blog.al-shami.net/?p=195#comment-256 No its not that mohammed, I have utorrent. The problem mohammed that I do not know what setting is right, But for sure I am not in switch+DNS/DHCP mode . when I go to the basic setting I found it : Setup -> Basic Setup -> WAN Setup -> Automatic Configuration - DHCP What I need is to make it switch + access point, So I can connect directly to the Motorola CPE. I am working on something now and I will let you know what is the result. No its not that mohammed, I have utorrent.
The problem mohammed that I do not know what setting is right, But for sure I am not in switch+DNS/DHCP mode .

when I go to the basic setting I found it :
Setup -> Basic Setup -> WAN Setup -> Automatic Configuration – DHCP

What I need is to make it switch + access point, So I can connect directly to the Motorola CPE.

I am working on something now and I will let you know what is the result.

]]> By: Mohammad Al-Shami http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-255 Mohammad Al-Shami Mon, 11 Jan 2010 06:00:53 +0000 http://blog.al-shami.net/?p=195#comment-255 Are you using dd-wrt as a router or as a switch? I'm personally using it as a switch+DNS/DHCP. If you're using it as a router and use bittorrent this might solve your problem http://www.morelightmorelight.com/2007/04/19/dd-wrt-router-slowdown-solved/ Are you using dd-wrt as a router or as a switch? I’m personally using it as a switch+DNS/DHCP. If you’re using it as a router and use bittorrent this might solve your problem

http://www.morelightmorelight.com/2007/04/19/dd-wrt-router-slowdown-solved/

]]> By: Hesham http://blog.al-shami.net/index.php/my-experience-with-the-motorola-cpeo-400-wimax-cpe/comment-page-1/#comment-254 Hesham Sun, 10 Jan 2010 19:11:16 +0000 http://blog.al-shami.net/?p=195#comment-254 It is slow compared to the direct connection from Motorola CPE in Both Browsing/Downloading, Sometimes it stop the service and I turn dd-wrt modem off and turn on again. I believe there is a problem in my dd-wrt setting. When I go to the motorola CPE page it does not have many options thats why there is nothing to change, currently the Motorola CPE settings is left as it is even when I put the dd-wrt. It is slow compared to the direct connection from Motorola CPE in Both Browsing/Downloading, Sometimes it stop the service and I turn dd-wrt modem off and turn on again.

I believe there is a problem in my dd-wrt setting.
When I go to the motorola CPE page it does not have many options thats why there is nothing to change, currently the Motorola CPE settings is left as it is even when I put the dd-wrt.

]]>